Loading...

Creo

Pellet stove
 
Meticulous finishes with strong materials and refined monochromatic paints make Creo® a pellet stove with a modern design.
Heatable area
109 .
  • nero opaco
 


1 - Screen-printed ceramic glass and cast iron firebox door
2 - THERMOCORE® pipe heat exchanger
3 - Pelletpower® patented automatic automatic-cleaning burner

Every uniti s tested for one hour in the factory Our products don’t incur additional cost for adjustments or testing Simplified cleaning system Heat exchanger Thermocore® External rotor room fan is guaranteed for 4 years Low energy consumption only 36 decibels of noise Thermosilent system Warm air filtring system Madaly Smart info Mechanical-safety-devices Crono_36x36 elevati_spessori_36x36





Dimensions
  • Creo Air
Technical data
DIMENSIONS (HxWxD)    1106x543x583
WEIGHT (kg)    130
HEATABLE AREA (m²)    109
EFFICIENCY UP TO MAX (%)    93,8%
ENERGY CLASS    A+
POWER TO THE HEART (kW)    3,8 - 12,9
RATED POWER (kW)    3,5 - 12,1
POWER TO THE WATER (kW)     -
RADIATION (kW)     -
HOURLY PELLET CONSUMPTION (kg/h)    0,8 - 2,7
WOOD HOURLY CONSUMPTION (kg/h)     -
PELLET HOPPER CAPACITY (kg)    19,0
WARM AIR DUCTING    -
MAXIMUM SINGLE DUCTING OUTLET (m)    -
PATENTED BURNER PELLETPOWER®    -
ROOM VENTILATION    SI
PRIMARY AIR FROM OUTSIDE    SI
CO EMISSIONS (mg/m³; 13% of O2)    148
CO EMISSIONS (mg/m³; 10% of O2)    -
DUST EMISSIONS (mg/m³; 13% of O2)    13
DUST EMISSIONS (mg/m³; 10% of O2)    -
SILENCE (dB)    36
REMOTE CONTROL    SI
RADIO CONTROL WITH ROOM TEMPERATURE THERMOSTAT    OPT
WEEKLY PROGRAMMER (3 DAILY LIGHTING)    SI
«SMART INFO» FUNCTION    SI
SYSTEM CIRCULATING PUMP    -
EXPANSION TANK    -
OVER PRESSURE VALVE    SI
FLUE GASEXHAUST DIAMETER (mm)    80
MIN. FLUE DRAUGHT PRESSURE (Pa)    10
ELECTRIC CONSUMPTION (Watt)    40-290
HIGH TEMPERATURE SAFETY THERMOSTAT    SI
*A Emissions and performance data may change according to the fuel used. The values of pellet products have been obtained by using certified fuel according to EN 14961-2 A1-A2 norm. Wood logs products values may vary according to the type and quality of the wood logs used.
*B Provisional data under certification
*C IMPORTANT: when calculating the volume of the “Heated area” some relevant aspects must be considered: insulation of the building (Energy Class), position of the heater, climatic area and more aspects that can affect the values of performance. Reported data have been calculated on the base of roof not higher than 3 mts.
The manufacturer reserves the right to make changes without previous notice.
Downloadable docs
3) RIVESTIMENTO CHIC_CHICSUPREME_Manuale_Rev
3 Manuale Pair 7-12 Evo Cod
EU Declaration of Conformity Pair7-12evo
Report DK Pair7evo
Report CE Pair7-12evo
Report DK Pair12evo
Report Ecodesign Pair7evo
Report Ecodesign Pair12evo
Energy Label PAIR EVO 7
Energy Label PAIR EVO 12

Need help?

Contact us!